I need 4 off - 28mm OD x 21.6mm ID x 62mm long steel tubes making.

They are for my top wishbone camber adjuster tubes to fit into. The camber adjuster tubes have an OD of 21.53mm. the nearest comercial size i can find is 22mm ID and they are to sloppy inside those.

If you can give me an all in delivered price that would be fantastic.

You may know this but just in case- if you have the alloy camber adjusters then it's worth researching their suitability for a road car.

There have been some documented cases of alloy ones failing.

Cheers,
James

I have the steel ones but thanks for the info

Flakmonkey on here used to do machining. Not seen him on for ages but maybe worth a search and email ?

I can do the machine work, never done anything to show off on this forum, but I have done a fair amount of gunsmithing work, making component parts for airguns and threading rifles for silencers. I'll see what stock I have kicking around today and let you know.

Feel free to browse my photobucket to see things I have done (may be a few pages back)

http://s222.photobucket.com/user/dave_424/library/?sort=3&page=1

Dave

[Edited on 19/8/13 by dave_424]

Dave, thank you for the offer, but another contact has got me some cds in the right spec.

On with top wishonproduction now