Board logo

fuel pipe wanted please.
nick-york - 27/10/13 at 06:30 PM

Hi ! Im after a piece of fuel pipe to connect my petrol tank to my filler cap end . It needs to be 50 mm internal diameter and at an angle of more than 90 % . I've guessed it must be at about 100°. So basically a 100° bend . A minimum of about 150 mm in both directions . Hope this makes sense ! Cheers !

renetom - 1/11/13 at 08:18 AM

Hi
Fit the filler cap in the top, not the rear panel.
Makes it much easier to fill up.
ask around.
good luck whatever you choose.

wilkingj - 1/11/13 at 11:36 AM

quote:
Originally posted by renetom
Hi
Fit the filler cap in the top, not the rear panel.
Makes it much easier to fill up.
ask around.
good luck whatever you choose.



+1

With petrol the price it is, you want it in your tank, and not on the forecourt