Anyone got a Sierra prophaft?

Hey KJ,

I assume you are asking for one to buy rather than just for information, I have one but not sure yet if I am going to need the attatchments for my build yet?

If its only for info let me know what you need...

How long ?
I've got one to fit a T 9 box

Hi looking to buy to a std sierra one to modify

I've just been on to Dunning and Fairbank to see if they use the old prop parts to build the new one, if they don't then you can have my old one, but its quite heavy so would probably need collecting...

just thinking if you need a short prop i have taken one off my car which was type 9 to sierra dif, i can measure if you like.

KJ

From the face of the diff to the end of the outputshaft from the gearbox it is 484mm.

I also have a mate who goes upto Newcastle several weekends so could ask him if he could take the prop up your way?

Mine is 79.5

Ok, When I hear back from D&F if they need the bits off mine I'll let you know, if they don't then you can have mine

Yours is a touch too long for mine though...

[Edited on 7/11/13 by tims31]

Now sorted