Board logo

wanted small bore master cylinder
steve m - 7/11/13 at 02:29 PM

Currently I have a leaky 19.05mm ford escort master cylinder

but would like a smaller bore one, that I believe is a Mk1 Fiesta and is 17.5mm bore

does any one have a nice new one knocking about for beer tokens, or could pass on any info were I could obtain one

regards

steve


pekwah1 - 7/11/13 at 03:52 PM

steve, think i've got a couple of old master cylinders knocking around in the garage, no idea of condition or bores but i'll have a check tonight and you'll be welcome to them!


steve m - 7/11/13 at 04:32 PM

Thanks, m8

even if there no good, it will give me a chance of seeing if they fit

Hope you have a good torch !


matty h - 7/11/13 at 06:35 PM

Take a look at this website loads of info.

http://brakeparts.co.uk/

Matty

[Edited on 7/11/13 by matty h]


pekwah1 - 7/11/13 at 09:41 PM

Hi mate, looks like I need a better torch, couldn't find any... Will have a better look on the weekend but could be bad news I'm afraid...


steve m - 7/11/13 at 10:14 PM

Andy

You really are pissing me off !!



hahaha


pekwah1 - 8/11/13 at 10:15 AM

yeh, i'm pretty much a constant let down.... i know i know....
i'll try to be a better person in the future