Indicator stalk needed ASAP. Thank

Part nr 8786 138 302 AA

[Edited on 7/11/13 by daveb666]

I've got some stalks, can confirm part number this afternoon.

Has the old one gone faulty?

They are exposed and water seeps down the hazard button and corrodes the PCB inn the switch.
When this happens it gives rise to a funny fault, and took me a while to find it, (apart from flattening the battery as well).

I used to squirt a bit of WD40 into the switch and never had the problem again (after changing the switch).

Dont know if this helps.

Regards
Geoff

Thanksfor the reply Geoff. I had issues with the indicators and main beam flash, I took apart the stalk last night after deciding that that was the cause of the problem and, aside from a damaged and corroded PCB, the plastic nugget tthat shorts outthe iindicator pins had snapped/melted. I.E its definitely broke lol

Found one, thanks.