anyone on here able to cur these out for me:

I need them cut out of 1 to 1.5mm thick steel (or something close to that) ones 160x40mm the other is 160x100mm

stainless or bright steel would be nice, but any steel will do really as long as its clean and rust free - the quicker and cheaper the better



I can do dimensioned drawings and/or dxf/dwg files, and maybe even DSTV flies if needed

cheers
-Robert

Some possible leads in this thread http://www.locostbuilders.co.uk/viewthread.php?tid=186146

bumpy