dhutch
|
| posted on 15/5/09 at 11:11 PM |
|
|
Wtd: Ford crankshaft pulley and/or 36-1 wheel
Having got carried away and bought a megajolt i need to sort the other bits i havnt got (have edis/coil/vr etc) so im angling after a front pulley to
suit a cvh.
The current one it the (nice and light) pressed steel one. But theres not much to machine, and its a but bend too so a more solid one sounds the best
route.
Anything considered.
Daniel
|
|
|
|
|
whitestu
|
| posted on 16/5/09 at 07:00 AM |
|
|
A CVH 1.8 one has a toothed wheel on it, but they are heavy. A Zetec one should fit.
I welded toothed wheel onto my Zetec front pulley.
Stu
[Edited on 16/5/09 by whitestu]
|
|
|
dhutch
|
| posted on 16/5/09 at 12:32 PM |
|
|
Yeah, everyone keeps mentioning the 1.8cvh pulley but ive yet to find any or even a photo.
- Dont know how well then lend themselfs to having some material machined off them? Single V-belt?
As you say, otherwise somthink off a zetec or simular, and a toothed wheel from somewhere and job done.
Daniel
|
|
|
