Miks15
|
| posted on 18/5/09 at 07:57 PM |
|
|
WTD: 42mm steel tube 1.5-2mm wall
After some 42mm or there abouts steel tube to make up my carbs manifold. Will need about 600mm i think
Can anyone help me out?
Thanks
Mikkel
|
|
|
|
|
redscamp
|
| posted on 18/5/09 at 09:45 PM |
|
|
look at
http://www.catalogue.bosal.com/pdf/prelim/pp_exh_buk_en.pdf
then order through local motor factor
|
|
|
splitrivet
|
| posted on 18/5/09 at 11:13 PM |
|
|
Exhaust suppliers is the best bet or a root in an exhaust fitters skip.
Cheers,
Bob
I used to be a Werewolf but I'm alright nowwoooooooooooooo
|
|
|
hughpinder
|
| posted on 19/5/09 at 07:54 AM |
|
|
Exhaust tube - I bought a 2m length for £4.76 (44mm OD *1.5)
Regards
Hugh
|
|
|
coozer
|
| posted on 19/5/09 at 09:34 AM |
|
|
I can help you for free... I can bring you some to Newark if your going??
Steve
1972 V8 Jago
1980 Z750
|
|
|
SPYDER
|
| posted on 19/5/09 at 08:44 PM |
|
|
I have around a metre of 45mm OD, 2mm wall thickness Stainless tube if that would be any use?
I'm fed up of tripping over it.
Geoff
|
|
|
