alistairolsen
|
| posted on 29/6/09 at 01:27 PM |
|
|
approx 150mm of seamless tube approx 20mm bore
I need to make up some camber adjusters like the ones on the rally design site but for a different thread. as theyre going to be custonm it makes
sense to use a standard tube size and machine them to suit.
The tube must be clean and round internally (ie CDS seamless) and Im aiming for 20mm, altho something like 25mm 2 mm wall would do for instance.
What does anyone have in the scrap bucket?
Cheers
|
|
|
|
|
MakeEverything
|
| posted on 29/6/09 at 01:33 PM |
|
|
Ive got some 20mm Gas barell which is seamless and galvanised if you want it?
Kindest Regards,
Richard.
...You can make it foolProof, but youll never make it Idiot Proof!...
|
|
|
alistairolsen
|
| posted on 29/6/09 at 01:38 PM |
|
|
20mm inside?
What sort of wall thickness? Last gas pipe I had was half inch by 2.5 wall or something and if its that sort of ballpark it sounds perfect.
|
|
|
