flak monkey
|
| posted on 18/8/09 at 09:45 AM |
|
|
275lb 1.9" ID springs
Anyone got a pair of 275lb springs going spare, either in yellow or black?
Need about 8-9" long if my memory serves me correctly.
Willing to swap for my pair of 325lb ones.
Cheers,
David
Sera
http://www.motosera.com
|
|
|
|
|
speedyxjs
|
| posted on 18/8/09 at 09:58 AM |
|
|
If you dont swap the 325's, i may be interested in them  . The ones i have atm are too weak for my motor but not sure what they are.
[Edited on 18-8-09 by speedyxjs]
How long can i resist the temptation to drop a V8 in?
|
|
|
Andy D
|
| posted on 18/8/09 at 10:23 AM |
|
|
I have a pair of yellow 1.9 9" 240lbs... too soft I guess..
|
|
|
flak monkey
|
| posted on 18/8/09 at 10:25 AM |
|
|
quote:
Originally posted by Andy D
I have a pair of yellow 1.9 9" 240lbs... too soft I guess..
I should think so. 275lb is a guess at the mo though.
Basically my 325s are going to be miles too stiff with the duratec planted in the chassis much further back than the pinto (they are a tad hard for
the pinto TBH). 275lb seems to be the std springs that most manufacturers supply with the kit so I thought it was a good starting point if nothing
else
Sera
http://www.motosera.com
|
|
|
jeffw
|
| posted on 18/8/09 at 01:02 PM |
|
|
Since we are swapping springs I have a pair of 8" 350Lb 1.9" ID black ones that could do with a new home...
|
|
|
PumaWestie
|
| posted on 18/8/09 at 02:53 PM |
|
|
Ive got some 275lb x 8" long in 2.25" dia
Also got some 250lb, same length, same dia.
Any use to anyone?
|
|
|
