blakep82
|
| posted on 27/8/09 at 12:32 AM |
|
|
wtd: single bike carb - zx9r
long shot i know, but i'm after a single carb from a kawasaki zx9r (cvr carbs?) the one i need is the one furthest from the tps
really hope someone's got one laying about. don't fancy buying another whole set of carbs 
[Edited on 27/8/09 by blakep82]
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
|
|
mcerd1
|
| posted on 27/8/09 at 08:02 AM |
|
|
did you find out how much the bits were ? or is it totaly dead ?
[Edited on 27/8/09 by mcerd1]
-
|
|
|
blakep82
|
| posted on 27/8/09 at 10:08 AM |
|
|
i emailed my local bike bike shop, who do repairs, honda trained etc. here's their email
Dear Sir,
Given our experience with those we have found it to be advantageous to go to part finder and get another set. You should be able to pick
up a bank of carbs for prices of up to £100.00 and this, in the long run, would be the best idea.
Part finder ---09060 300100 fax 09060 300101
My very best wishes
erm, not happy with that. i'm sure a shaft and butterly and fitting won't cost £100...
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
mcerd1
|
| posted on 27/8/09 at 10:31 AM |
|
|
you could always try the main dealers
(this lot are nearer you)
MCS Scotland Ltd
20 Fulbar Street
PA4 8PD
tel. 0141 561 7521
-
|
|
|
