westy turbo
|
| posted on 15/10/09 at 05:24 AM |
|
|
BERU Plug leads for XE
As above for coil pack in good condition 
|
|
|
|
|
mediabloke
|
| posted on 15/10/09 at 11:24 AM |
|
|
Sorry if it's a daft question, as I guess it depends on which coil pack, but are the posts not the same as the Vx? I spent ages looking around
for a set of leads to fit my early Ford coil pack onto my Vx plugs, until I swapped it for a later Ford one with the correct post sizes.
Francis
|
|
|
blakep82
|
| posted on 15/10/09 at 11:59 AM |
|
|
yep later ford coil pack works fine with standard vauxhall leads
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
westy turbo
|
| posted on 15/10/09 at 02:10 PM |
|
|
Thats the one and your right it like a focus one
|
|
|
mediabloke
|
| posted on 16/10/09 at 09:38 PM |
|
|
Yep - the insulators look the same size, but it depends on the pin sizes themselves. Got any photos of them?
|
|
|
westy turbo
|
| posted on 17/10/09 at 08:04 AM |
|
|
from the cables? or the coil?
|
|
|
mediabloke
|
| posted on 17/10/09 at 02:03 PM |
|
|
Yep - I meant the ones on the coil. The connectors on the coil end of std XE leads will fit a coil with conductors about 3-4mm wide. It's then
just a case of getting a std set from Vauxhall (seem to be better than some aftermarket ones).
|
|
|
