cd.thomson
|
| posted on 11/11/09 at 09:21 AM |
|
|
WTD: loads etc!
Hi guys, anyone have any of this stuff they want to get rid of?
6 inch+ 12mm ID marked fuel hose
6 inch+ x2 8mm ID marked fuel hose
5x 12mm ID rubber lined pclips for 8mm hose
10x 30-50mm jubilee clips
3x 90 degree silicon hose (32mm id) black if possible
2 x straight silicon hose 32mm id black if possible
a length of 32mmish od ally tubing to use with the above
peanuts waiting,
cheers! 
Craig
|
|
|
|
|
scootz
|
| posted on 11/11/09 at 09:34 AM |
|
|
Bugger... I have none of that and I just LOVE peanuts!
It's Evolution Baby!
|
|
|
prawnabie
|
| posted on 11/11/09 at 10:55 AM |
|
|
Ive got an alloy 32mm hose joiner you can have for postage it you need that?
|
|
|
Charlie_Zetec
|
| posted on 11/11/09 at 11:03 AM |
|
|
Might have some ally tubing at home, U2U me other wise I'll forget, and I'll check when I get in from work tonight!
Artificial intelligence is no match for natural stupidity!
|
|
|
coozer
|
| posted on 11/11/09 at 11:25 AM |
|
|
Hose clips for peanuts HERE!
1972 V8 Jago
1980 Z750
|
|
|
cd.thomson
|
| posted on 11/11/09 at 11:29 AM |
|
|
thanks everyone so far!
oh yes forgot to add, hose clips are only really if I'm buying something else as postage doesnt make a lot of sense for clips I can get down at
screwfix.
Thanks for the link coozer
Craig
|
|
|
flibble
|
| posted on 11/11/09 at 03:38 PM |
|
|
Cheap 32mm tube
Like this on Ebay, I used a couple of straights and a couple of the bent ones
to eliminate the expensive silicone bends
Might have a couple left over, will have a hunt later on (If stainless is ok rather than ally?),
[Edited on 11/11/09 by flibble]
|
|
|
