theconrodkid
|
| posted on 19/11/09 at 12:47 PM |
|
|
pillar drill switch
i have searched high and low,from the deserts of wickes to the jungle that is maplins and even the badlands of my local tool shop to no avail
all i seek is a square green "start" button for my trusty pillar drill,just the green cover is all i desire to make my trusty tool
complete again,so anyone got one going spare?
who cares who wins
pass the pork pies
|
|
|
|
|
blakep82
|
| posted on 19/11/09 at 12:51 PM |
|
|
does RS not have what you want? is the one on your drill broken? can you find out the manufacturer of the switch?
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
dinosaurjuice
|
| posted on 19/11/09 at 12:53 PM |
|
|
ive got some complete NVR switches if there any good?
|
|
|
will121
|
| posted on 19/11/09 at 01:08 PM |
|
|
is there any way of making one/something. i remember in the 80's my dads drill had one wittled out of a piece of wood, but he was a carpenter!!!
|
|
|
minitici
|
| posted on 19/11/09 at 01:13 PM |
|
|
I just rewired my 3phase drill control box and used this
Green Button
and this
Red Button
|
|
|
blakep82
|
| posted on 19/11/09 at 01:23 PM |
|
|
quote:
Originally posted by minitici
I just rewired my 3phase drill control box and used this
Green Button
and this
Red Button
ooh, been after something like that myself to go along with the start button i got from CBS
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
theconrodkid
|
| posted on 19/11/09 at 02:18 PM |
|
|
dinosaur juice,you have u2u
the switch itself is not broken,just the green bit flew off one day never to be seen again
who cares who wins
pass the pork pies
|
|
|
blakep82
|
| posted on 19/11/09 at 02:21 PM |
|
|
green felt tip pen? green paint?
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
theconrodkid
|
| posted on 19/11/09 at 04:30 PM |
|
|
green felt tip pen? green paint?
erm,there is nothing to paint,just a big hole
who cares who wins
pass the pork pies
|
|
|
Peteff
|
| posted on 19/11/09 at 04:46 PM |
|
|
The switch on my Screwfix drill broke so I joined the wires at the back and used the wall socket to switch it on and off.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
RichardK
|
| posted on 19/11/09 at 08:25 PM |
|
|
what size of square, have probably got some photocopier start buttons on some knackered copier displays that I can have a look at.
Cheers
Rich
Gallery updated 11/01/2011
|
|
|
theconrodkid
|
| posted on 19/11/09 at 09:56 PM |
|
|
it,s about 19mm square with a round prodding thingy in the middle that is about 8mm round,i can get proper measurements morra if you need them
who cares who wins
pass the pork pies
|
|
|
