r1_pete
|
| posted on 15/12/09 at 09:34 PM |
|
|
Wtd, offcut of 2 or 3mm ally plate.
Piece of 2 or 3 mil ally plate wanted about 250mm x 100mm....
|
|
|
|
|
Steve Hignett
|
| posted on 15/12/09 at 09:37 PM |
|
|
Can it be thicker than that?
|
|
|
r1_pete
|
| posted on 15/12/09 at 09:39 PM |
|
|
It could be, marginally, I need to put a 90 degree bend lengthways, its for an under dash extension for the ignition switch on a Jaguar.
|
|
|
Steve Hignett
|
| posted on 15/12/09 at 09:53 PM |
|
|
My offcut prob won't be suitable then, it's only 5mm so not that much thicker, but it is very hard - sorry mate...
|
|
|
loggyboy
|
| posted on 15/12/09 at 10:45 PM |
|
|
Ebay £5??
[Edited on 15/12/09 by loggyboy]
|
|
|
