cd.thomson
|
| posted on 1/2/10 at 09:49 AM |
|
|
wtd: rubber gromit
my current hole through the bulkhead isnt big enough for everything to get through!
does anyone have a old gromit lying about with a reasonable ID that I could have for some pennies?
Craig
|
|
|
|
|
mcerd1
|
| posted on 1/2/10 at 10:22 AM |
|
|
whats the min. size you need ?
-
|
|
|
cd.thomson
|
| posted on 1/2/10 at 10:24 AM |
|
|
im honestly not sure!
15-20mm i would have thought to ensure a tight fit.
Craig
|
|
|
mcerd1
|
| posted on 1/2/10 at 10:49 AM |
|
|
not sure what I've got that size, I'll have a look later....
or CBS sell packs for a few £ linky
-
|
|
|
tilly819
|
| posted on 1/2/10 at 11:09 AM |
|
|
Iv got one you can have
for a 20mm hole with the gromit in gives you about 18mm clearance
F20C Haynes roadster 440 BHP/Tonne www.youtube.com/handmadeextreme
|
|
|
tilly819
|
| posted on 1/2/10 at 11:12 AM |
|
|
actualy just measured about 16mm clearance
F20C Haynes roadster 440 BHP/Tonne www.youtube.com/handmadeextreme
|
|
|
RAYLEE29
|
| posted on 1/2/10 at 01:47 PM |
|
|
hi, you can get a little pack from your local halfords or a bigger box
some elecrtical ones can be had from B&Q or your local electrical wholesalers for pence might even give you a couple if your lucky
Ray
|
|
|
tilly819
|
| posted on 1/2/10 at 03:48 PM |
|
|
there are 4 in the post to you now
chears tilly
F20C Haynes roadster 440 BHP/Tonne www.youtube.com/handmadeextreme
|
|
|
cd.thomson
|
| posted on 1/2/10 at 03:50 PM |
|
|
thank you very much tilly.
Craig
|
|
|
