MakeEverything
|
| posted on 7/9/10 at 08:28 PM |
|
|
Wtd: New HT Leads for Ford Coil PAck
I fitted the HT leads today to try and see where the coil pack needs to go, and i noticed that the renault HT leads dont fit the Ford coil pack.
Does anyone have any new Zetec HT Leads they want rid of before i go hunting?
Kindest Regards,
Richard.
...You can make it foolProof, but youll never make it Idiot Proof!...
|
|
|
|
|
mrwibble
|
| posted on 7/9/10 at 08:54 PM |
|
|
just a note of caution, there were 2 different boot fittings for the coil packs on the zetec. the earlier coils had a shiny brown plastic around the
connectors and iirc the ht leads had a clamp like projections either side. the later coils were completely black and more matt in appearance, with
simpler push on fittings.
|
|
|
MakeEverything
|
| posted on 7/9/10 at 08:58 PM |
|
|
quote:
Originally posted by mrwibble
just a note of caution, there were 2 different boot fittings for the coil packs on the zetec. the earlier coils had a shiny brown plastic around the
connectors and iirc the ht leads had a clamp like projections either side. the later coils were completely black and more matt in appearance, with
simpler push on fittings.
Thanks. I know the clamp like fittings you are talking about, and its not those i need.
I used to be able to buy NGK spark plug heads and cable to make HT leads up on gas furnaces, but i cant seem to get them any more?
Kindest Regards,
Richard.
...You can make it foolProof, but youll never make it Idiot Proof!...
|
|
|
mrwibble
|
| posted on 8/9/10 at 10:25 AM |
|
|
imo some magencor blue or red leads always look nice, the spec of the engine prolly warrants it 
|
|
|
