FuryRebuild
|
| posted on 20/2/12 at 04:16 PM |
|
|
Wanted - Duratec engine
My local breakers don't have any duratec 2.0's in stock at the moment, and I need one to go into my Fury. I thought the nice thing to do
would be to ask the collective if they had one first, before I went off to the breakers.
I would like it to have:
1) Injectors and fuel rail
2) Startermotor
3) alternator
4) all sensors
5) sump
6) water pump - in fact, most of the stuff that bolts on to the engine.
I have a set of jenveys so don't need induction, and haven't bought a management system yet.
I will be ordering a bell-housing, clutch etc. Saying that, if you have a rwd bell-housing, clutch and other gubbins to go onto my type 9 box then
i'm still interested (pinto gearbox, right? I think so. At least I hope so, else I may have the wrong bits arriving 
So, if you have a duratec in good condition, let me know. I don't mind the miles on the block if the oil pressure and compression are in good
state. There is a school of thought that says that high mileage is good because the thermal cycling of the block increases it's hardness.
Thanks in advance
Mark
|
|
|
|
|
big-vee-twin
|
| posted on 20/2/12 at 06:27 PM |
|
|
Sure someone on here was selling a set up few days ago worth having a search.
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
eddie99
|
| posted on 20/2/12 at 09:35 PM |
|
|
I have a 1800 Duratec? Any interest to you?
http://www.elitemotorsporteng.co.uk/
Twitter: @Elitemotoreng
Facebook: http://www.facebook.com/pages/Elite-Motorsport-Engineering/153409081394323
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
FuryRebuild
|
| posted on 20/2/12 at 11:09 PM |
|
|
Hi Eddie - It's a 2.0 I'm after, thanks all the same.
|
|
|
