Barkalarr
|
| posted on 18/3/12 at 09:18 AM |
|
|
Indy R1 Reverse Required
I'm looking for an electric reverse for my MK Indy R1. £££ waiting.
|
|
|
|
|
tilly819
|
| posted on 18/3/12 at 11:44 AM |
|
|
Iv got one,
It uses the MK gear and a starter motor i found that goes the right way. not the one MK supply (that they claim has been modified to make it work, but
wont say how, and claim it wont work unless you by there very over priced one)
You may gather this is a slightly sore point with me.
the gear is worn slightly,
You will need to make some brackets for the motor, it will fit in the bottom of the trans tunnel facing the rear. you can have the gear and the motor
for £75 + post, For ref the MK kit when i inquired about it was £300
Hope this helps
Tilly
F20C Haynes roadster 440 BHP/Tonne www.youtube.com/handmadeextreme
|
|
|
Barkalarr
|
| posted on 18/3/12 at 01:13 PM |
|
|
Hi Tilly,
Am I right in thinking this bolts between the prop-shaft and the diff at the back of the car?
I'm a little in the dark here - I have tried looking on the MK website for an example of how this fits into the car, but I can't find
anything anywhere.... If you (or anyone else) has a picture of how this is mounted in the car or can explain how this mounts in the car I'd
really appreciate it.
Also, what is the internal diameter of this cog?
I'm using a sierra rear diff (if this helps)
I'll shoot you a u2u about payment / delivery.
Cheers
Neil
|
|
|
tilly819
|
| posted on 18/3/12 at 01:27 PM |
|
|
It will fit on the sierra diff (that's what i had it on)
I will try and find a photo of it installed for you
tilly
F20C Haynes roadster 440 BHP/Tonne www.youtube.com/handmadeextreme
|
|
|
