monkeyarms
|
| posted on 30/3/12 at 12:56 PM |
|
|
exhaust pipe bends wanted - odd size
Can anyone supply exhaust bends to odd sizes?
Could a 42mm 180 deg bend be flared/stretched on one end to slot over a 2.5" pipe?
Is this possible?
|
|
|
|
|
tilly819
|
| posted on 30/3/12 at 01:24 PM |
|
|
why not get an adapter to go inbetween
http://www.jetex.co.uk/website/custom_parts.php?mat=Aluminised+or+mild&dia=2.0+inch
you can get odd sized parts made but they wont be as cheep as standard ones
tilly
[Edited on 30/3/12 by tilly819]
[Edited on 30/3/12 by tilly819]
F20C Haynes roadster 440 BHP/Tonne www.youtube.com/handmadeextreme
|
|
|
monkeyarms
|
| posted on 30/3/12 at 01:50 PM |
|
|
I could get an adaptor, but i was trying to keep joints to a minimum, less chance of leaks, a bit neater etc.
To Stuart, I will keep you in mind if i need the 90 bend thank you 
|
|
|
daviep
|
| posted on 30/3/12 at 02:27 PM |
|
|
No way could 42mm be stretched to fit over 2.5" you're talking about increasing the ID from 39m to 64mm (approx. sizes) 
Are you making a system from scratch or modifying one?
Davie
“A truly great library contains something in it to offend everyone.”
|
|
|
Confused but excited.
|
| posted on 30/3/12 at 05:13 PM |
|
|
^ Correct, but you could get 64mm swaged down to the required inside diameter.
Tell them about the bent treacle edges!
|
|
|
40inches
|
| posted on 31/3/12 at 09:46 AM |
|
|
Not cheap, but eBay - The UK's Online Marketplace would make you one, look at the left hand fitting.
|
|
|
coozer
|
| posted on 31/3/12 at 12:07 PM |
|
|
If your feeling flush I spotted these stepped adapters while memorising the catalogue waiting for my load at Tesco's RDC last night.. talk
funny up there in Livingstone
http://content.yudu.com/Library/A1v7rw/CBSCatalogueIssue19n/resources/index.htm?referrerUrl=http%3A%2F%2Fwww.nfauto.co.uk%2F
Woops! Go to page 66~67...
[Edited on 31/3/12 by coozer]
1972 V8 Jago
1980 Z750
|
|
|
monkeyarms
|
| posted on 31/3/12 at 01:16 PM |
|
|
thanks for the help guys, I found this...
Cone 2.5' to 1.75' Stainless Exhaust Pipe Reducer Adapter Connector 63mm - 45mm | eBay
|
|
|
