nilocp
|
| posted on 18/4/12 at 07:53 PM |
|
|
Wheels
Looking for set 13in wheels. Prefer without tyres. 6 or 7in or even 6+7.
Minilite / revolution type would be best, but would consider others.
If you can pack, I can arrange collection.
Colin
|
|
|
|
|
rash12
|
| posted on 19/4/12 at 07:06 AM |
|
|
wheels
hi ive got a set of bbs 13 inch wheels very lightweight with centers etc what pcd are you after if your interested i can send u some pics to email?
thanks
|
|
|
nilocp
|
| posted on 19/4/12 at 08:14 AM |
|
|
Silly me, Ford axles, so standard RWD Escort type.
|
|
|
rash12
|
| posted on 19/4/12 at 04:33 PM |
|
|
wheels
sorry they are 14x6 with 100mm pcd
|
|
|
silverback
|
| posted on 20/4/12 at 07:48 PM |
|
|
wheels
If you are interested I have a set of 4 cosmic alloy wheels ford fitting but they are only 51/2" x 13"
Mick
|
|
|
nilocp
|
| posted on 20/4/12 at 07:53 PM |
|
|
Thanks Mick, 6 or 7 it is!
Colin
|
|
|
silverback
|
| posted on 21/4/12 at 08:43 AM |
|
|
No probs.
|
|
|
lsdweb
|
| posted on 21/4/12 at 09:13 AM |
|
|
I have a set of Minilites in 6" with tyres - will check the PCD later and let you know.
|
|
|
mrnoluck
|
| posted on 21/4/12 at 10:47 PM |
|
|
Wheels
Hi, I have got some Compomotive ML wheels, Ford fitting, 2 x 6" x 13" and 2 x 7" x 13 black centers, polished edge could do with a
re-furb.
Regards
Simon
|
|
|
nilocp
|
| posted on 26/4/12 at 04:48 PM |
|
|
Wyn sorry deleted your U2U before I managed to reply!!
|
|
|
lsdweb
|
| posted on 26/4/12 at 05:45 PM |
|
|
I will go and check them now!
|
|
|
lsdweb
|
| posted on 26/4/12 at 06:08 PM |
|
|
PCD = 4 X 108 - Ford etc
Wheel width 6"
Offset is around 30mm (I can measure more accurately tomorrow if you want)
Genuine Minilites
Photos herehere
here and
here.
Tyres are Avon Turbospeed 185/70s
Regards
Wyn
|
|
|
nilocp
|
| posted on 26/4/12 at 06:47 PM |
|
|
Thanks Wyn, I am sure they are functional, but I do not want them redrilled thanks.
Colin
|
|
|
lsdweb
|
| posted on 26/4/12 at 09:27 PM |
|
|
Sorry, I thought you were looking for that PCD?
|
|
|
nilocp
|
| posted on 26/4/12 at 10:23 PM |
|
|
Yes that PCD, but not 2 PCD's!!
Regards
CP
|
|
|
lsdweb
|
| posted on 26/4/12 at 10:43 PM |
|
|
Sorry - I'm confused! The wheels only have one set of bolt holes. The other holes are not bolt holes and are part of the original casting
(presumably to allow you to drill out if necessary or possibly for pegs for centre lock / knock on fitting.)
|
|
|
nilocp
|
| posted on 30/4/12 at 08:25 PM |
|
|
Thanks everyone, and Simon!, fixed up now.
Colin
|
|
|
