locoboy
|
| posted on 13/5/12 at 06:55 PM |
|
|
WTD: sheet of ally 65cm x 87
Guys,
I am looking for a sheet of ally to make a longer than standard cooker hood chimney from, our kitchen ceiling is very high and the telescopic affair
that is supplied with the hood is only a maximum of 77 cm long and I could do with it being another 10cm longer to allow me to drop the hood height
down to a more pleasing/effective height.
My father in law has the facilities at work to form the sheet into the correct shape but if he orders the material through work there is a minimum
120cmx240cm sheet size.
If you have any then it must be in mint condition on one side.
What have you got, how much do you want for it and where are you located?
I am in Telford, Shropshire but could travel for the right piece.
Colin
[Edited on 13/5/12 by locoboy]
ATB
Locoboy
|
|
|
|
|
CRAIGR
|
| posted on 13/5/12 at 07:01 PM |
|
|
Guy is advertising this on wscc if any good
Offcut from larger sheet I bought to fabricate a few things for my megablade
970 x 1180 x 3mm
1 edge could do with squaring up slightly
Still has protective plastic on both sides
Sheet this size would cost £45+ from metal merchant
Buyer can book their own courier to collect at their own risk
Cash on collection preferred ( CV47 1GT )
Any questions just drop me a pm
£30
[Edited on 13/5/12 by CRAIGR]
|
|
|
locoboy
|
| posted on 13/5/12 at 07:09 PM |
|
|
Cheers Craig,
I will see what else comes up...
Colin
ATB
Locoboy
|
|
|
CRAIGR
|
| posted on 13/5/12 at 07:11 PM |
|
|
No worries Colin.
|
|
|
silverback
|
| posted on 14/5/12 at 04:20 PM |
|
|
I have a nice piece in the garage but it might be a little thin it is only 1mm.
|
|
|
