mad4x4
|
| posted on 10/6/12 at 08:46 PM |
|
|
1/8 NPT Weldments
Need a couple of 1/8 NPT weld on bung things.
any suggestion
Scot's do it better in Kilts.
MK INDY's Don't Self Centre Regardless of MK Setting !
|
|
|
|
|
blakep82
|
| posted on 10/6/12 at 11:11 PM |
|
|
there's these, but only in aluminium... but if you're after aluminium ones, then they are perfect! 
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
mad4x4
|
| posted on 11/6/12 at 10:35 AM |
|
|
Needing Steel ones - I would settle for a different thread and a converter.
Scot's do it better in Kilts.
MK INDY's Don't Self Centre Regardless of MK Setting !
|
|
|
Confused but excited.
|
| posted on 11/6/12 at 12:21 PM |
|
|
Why not buy an 1/8NPT tap and a bit of round bar, then ; hacksaw, drill, in vice and tap. Simples.
Tell them about the bent treacle edges!
|
|
|
