Mr Whippy
|
| posted on 12/6/12 at 02:40 PM |
|
|
Wanted - 2.8 Ford v6 to Series 3 Landrover adaptor
Yeah this is a long shot but you never know what folk have kicking about...
There use to be a bellhousing adaptor that let you fit the 2.8 siamese port V6 found in capri's/granada's etc to the series 3 gearbox to
swap out the sluggish 2.25 petrol
Anyone have one or know where to get one now?
Or even an adaptor for a similar engine, excluding the rover V8 as that is too big
Thanks 
[Edited on 12/6/12 by Mr Whippy]
|
|
|
|
|
mcerd1
|
| posted on 12/6/12 at 04:03 PM |
|
|
the 8v & 24v 2.9 V6's should fit the same bellhousing/adaptors as the 2.8 (they are different from the essex and duratec ones though)
but you could always make an Owelly style DIY adaptor: linky
[Edited on 12/6/2012 by mcerd1]
[Edited on 12/6/2012 by mcerd1]
-
|
|
|
Wheels244
|
| posted on 12/6/12 at 05:44 PM |
|
|
Could give Steve Parker a ring.
They used to do this stuff. It
says it's now discontinued but got to be worth a phone call.
http://www.steveparkers.co.uk/convford2_3_8.php?PHPSESSID=d88097f9bd182090b0f0102bb0e89b44
|
|
|
Mr Whippy
|
| posted on 12/6/12 at 08:05 PM |
|
|
Cheers guys
I'll look into that but I don't have the equipment to machine one myself, would be nice if I could 
|
|
|
