samjc
|
| posted on 30/10/12 at 11:41 PM |
|
|
Wtd: sandwich plate
Hello all.
im on the hunt for a sandwich plate for between my pinto and my type 9 gearbox unsure of its real name but im guessing its around 1mm thick ally
pressed and cut to suit the type 9 box with all pre drilled holes, just thort id ask before trying to make one.
|
|
|
|
|
macc man
|
| posted on 31/10/12 at 08:11 AM |
|
|
These are hard to source at the breakers. They will not sell without the engine. I had to modify a mondeo one to fit a Zetec to a type 9. If you can
make a template you could get it laser cut ,much better than using a jig saw.
|
|
|
AdrianH
|
| posted on 31/10/12 at 08:24 AM |
|
|
If all else fails try this
eBay Item
Adrian
Why do I have to make the tools to finish the job? More time then money.
|
|
|
mcerd1
|
| posted on 31/10/12 at 11:11 AM |
|
|
don't have a spare one, but I can trace one out onto paper and post it to you FOC if that helps (won't get a chance till next week though)
-
|
|
|
