phelpsa
|
| posted on 16/12/12 at 10:21 AM |
|
|
WTD: Pipercross PX600 filter to borrow (Weds)
I am going to be doing to dyno work on the locost on weds (19th). I have fitted a PX600 airbox, but would like to back to back test an open filter.
Does anyone have one I could borrow? Obviously on a break it replace it basis. I am driving down from Cumbria to Reading on tuesday afternoon so could
meet/pick up and post back straight after.
Adam
|
|
|
|
|
clairetoo
|
| posted on 16/12/12 at 11:21 AM |
|
|
I've got one I'm not using - but its got Dzus fasteners instead of the stock clips . Unless they keep me in hospital I'll be
around...............
Its cuz I is blond , innit
Claire xx
Will weld for food......
|
|
|
scutter
|
| posted on 16/12/12 at 05:16 PM |
|
|
If your willing to swing via weest oxfordshire, i've a 600 filter and a larger airbox you can borrow. I'll have to leave them at the house
with the wife as i fly out to afgan on the monday night.
ATB Dan.
The less I worked, the more i liked it.
|
|
|
phelpsa
|
| posted on 19/12/12 at 07:30 AM |
|
|
quote:
Originally posted by clairetoo
I've got one I'm not using - but its got Dzus fasteners instead of the stock clips . Unless they keep me in hospital I'll be
around...............
Claire, thanks a lot for the offer but I've taken Dan up.
Adam
|
|
|
scutter
|
| posted on 20/12/12 at 10:51 AM |
|
|
Matt, would be good to see your results once completed.
We found the Pipercross filter in the airbox lost 2bhp when we were getting towards the 200 hp mark (not on my engine but a 2.2 pinto.)
ATB Dan.
The less I worked, the more i liked it.
|
|
|
phelpsa
|
| posted on 20/12/12 at 01:45 PM |
|
|
Dan, we had problem after problem with the car/dyno so didn't manage to try the big air box. The PX600 filter seemed to be an improvement on the
PX500, releasing a little bit up top. The engine really didn't get on with the PX600 airbox, it'll need some serious playing with
jets/needles to make it work and will probably lose a few bhp.
Adam
|
|
|
FASTdan
|
| posted on 20/12/12 at 03:49 PM |
|
|
I'd be interested to hear any more developments on this - as to how the airbox performs in the end and what you had to change to make it
work....
NEW danST WEBSITE NOW LIVE! Bike carbs, throttle bodies and more......
http://www.danstengineering.co.uk/
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
