scutter
|
| posted on 27/2/13 at 05:03 PM |
|
|
Outer wishbone tubes.
Folks after being let down by a mates mate. I need some tubes turning up to take my wishbone bushes.
They need to have a 29.2mm internal diameter and be 34mm long, the wall thickness i'm not too worried about as long as it's over 2mm. I
need 10 tubes doing.
Can anyone help or know someone that can? Beer tokens waiting.
Regards Dan.
The less I worked, the more i liked it.
|
|
|
|
|
snakebelly
|
| posted on 27/2/13 at 07:06 PM |
|
|
ive had some made for the Avon widetrack bones im making, cant remember the exact measurements but i had to have more done than i need , i can check
in the morning.
|
|
|
scutter
|
| posted on 28/2/13 at 07:51 AM |
|
|
quote:
Originally posted by snakebelly
ive had some made for the Avon widetrack bones im making, cant remember the exact measurements but i had to have more done than i need , i can check
in the morning.
Many thanks. Dan.
The less I worked, the more i liked it.
|
|
|
snakebelly
|
| posted on 28/2/13 at 12:35 PM |
|
|
Sorry they are only 31mm long with an I'd of 24mm so no good, sorry
|
|
|
snakebelly
|
| posted on 28/2/13 at 12:38 PM |
|
|
Just on the phone to the chap that made them for me to see if he can help
|
|
|
scutter
|
| posted on 28/2/13 at 04:11 PM |
|
|
Thanks, If not Gillman in the other tube thread stock some that are close enough.
ATB Dan.
The less I worked, the more i liked it.
|
|
|
snakebelly
|
| posted on 1/3/13 at 07:19 PM |
|
|
my guy cant help im afraid, well he can but the minimum length makes it very very very expensive!
|
|
|
