teegray19
|
| posted on 4/3/13 at 06:46 PM |
|
|
WANTED EDIS BITS
Evening all,
Does any one have a spare edis4 plug loom with crank sensor and MAP sensor?
Ive got pennies the pay pal ready to be transferred, thanks.
|
|
|
|
|
wilkingj
|
| posted on 5/3/13 at 09:32 PM |
|
|
I'll have a look in the garage. I think I have a unit, a plug, and the crank sensor.
Not sure anout the MAP sensor, dont think many EDIS's had that bit.
1. The point of a journey is not to arrive.
2. Never take life seriously. Nobody gets out alive anyway.
Best Regards
Geoff
http://www.v8viento.co.uk
|
|
|
teegray19
|
| posted on 5/3/13 at 10:35 PM |
|
|
Please that would be great! Cheers.
|
|
|
wilkingj
|
| posted on 6/3/13 at 03:31 PM |
|
|
I have two Edis Units, and an ESO unit. (NO MAP or O2 sensor)
The Edis units are with a plug and about 9" of cable.
I am sure these are what you need for Megasquirt or Megajolt.
The ESO unit came out of a later Fiesta that had the single point injection. However it does has a MAP input port and also has a O2 sensor (I have the
O2 sensor with it) It also has almost a complete lom. I do NOT know if this is of any use to you.
I DONT know if this one will work with MS or MJ.
None of them have a Crank sensor. I should have three, but there were none in my EDIS spares box.
I dont know where they went to.
ALL were taken out of running Fiesta's.
All £25 each +P&P at cost.
Dont know if this is of any use to you.
1. The point of a journey is not to arrive.
2. Never take life seriously. Nobody gets out alive anyway.
Best Regards
Geoff
http://www.v8viento.co.uk
|
|
|
