Sloan85
|
| posted on 14/5/13 at 05:01 PM |
|
|
Power commander for GSXR 1000 K1
I'm after a power commander for a gsxr 1000 k1. Anyone got one they want to sell?
Cheers
http://mkindygsxr.blogspot.co.uk
|
|
|
|
|
doobrychat
|
| posted on 14/5/13 at 08:35 PM |
|
|
you can use a later one from the gsxr range as long as the maps right..
|
|
|
Sloan85
|
| posted on 14/5/13 at 09:19 PM |
|
|
I believe I need a k1 or k2 so the plastic connectors fit my loom??
http://mkindygsxr.blogspot.co.uk
|
|
|
doobrychat
|
| posted on 15/5/13 at 07:48 AM |
|
|
i post the very same question on gixxer.com a few weeks ago..
http://www.gixxer.com/forums/showthread.php?t=354370
|
|
|
Sloan85
|
| posted on 15/5/13 at 06:28 PM |
|
|
Did you get a power commander for your K1/2 then?
Ive looked at K6 power commander v on eBay but I dont see how the plugs will connect to the loom?
cheers
http://mkindygsxr.blogspot.co.uk
|
|
|
doobrychat
|
| posted on 15/5/13 at 06:41 PM |
|
|
hi
they plug onto the injectors not the big main plug on the loom..
its a much better set up as the connections in the big plug are well known for failure..
|
|
|
Sloan85
|
| posted on 17/5/13 at 05:19 PM |
|
|
Still confused by this. Have you done this and got it to work? I emailed Dynojet who confirmed that it will not work.
[Edited on 17/5/13 by Sloan85]
http://mkindygsxr.blogspot.co.uk
|
|
|
doobrychat
|
| posted on 17/5/13 at 07:31 PM |
|
|
go to the link on gixxer.com or go there and post the same question..
Dynojet will not admit it will work as they will lose a sale of a K1 PC3...
|
|
|
doobrychat
|
| posted on 30/5/13 at 10:16 PM |
|
|
I have done it and it does work.. K6 pc3usb fitted to a k1/2 1000 engine and mapped... Passed emissions today at the IVA..
|
|
|
