steve m
|
| posted on 18/7/13 at 07:50 PM |
|
|
Wanted, anyone near Crawley sussex with a press ?
As ive got an escort halfshaft that needs a new bearing pressed on, (old one is off)
Beer tokens available
regards
Steve
Thats was probably spelt wrong, or had some grammer, that the "grammer police have to have a moan at
|
|
|
|
|
mark chandler
|
| posted on 18/7/13 at 09:00 PM |
|
|
Have you tried bearing in the oven and half shaft in the freezer?
Failing that most garages should have a 20 ton press
|
|
|
steve m
|
| posted on 18/7/13 at 09:11 PM |
|
|
Thanks Mark,
The halfshaft is to big for my freezer, and the oven will melt the rubber on the bearing, plus the psatic ball bearing cage !
Steve
Thats was probably spelt wrong, or had some grammer, that the "grammer police have to have a moan at
|
|
|
mark chandler
|
| posted on 18/7/13 at 09:29 PM |
|
|
Ah well, do you have anyone close that does agricultural vehicles, they have bigger presses. I can give you some contacts in East Sussex but its a bit
of a drive from Crawley to Robertsbridge.
[Edited on 18/7/13 by mark chandler]
|
|
|
renetom
|
| posted on 19/7/13 at 07:17 AM |
|
|
Hi Steve
If you bring it round to me, I'll take it round to the garage
I use , they have done loads of little jobs for me for a drink.
Regards
René
|
|
|
