Brian R
|
| posted on 18/1/14 at 11:25 PM |
|
|
1600 Crossflow exhaust wanted
Hello all.
I'm currently doing some work for a friend on an ex 750MC locost racecar and am after a complete exhaust system for it. The old one got used on
another racecar. Anybody got anything? It ideally needs to exit above the top chassis rail as the bonnet is cut out for it.
Thanks
Brian
|
|
|
|
|
pekwah1
|
| posted on 19/1/14 at 08:26 AM |
|
|
I've got a manifold that goes over the rail...
I can take some pics/measurements if you want?
|
|
|
Brian R
|
| posted on 19/1/14 at 12:08 PM |
|
|
Yes that would be great if you could. Thanks.
|
|
|
pekwah1
|
| posted on 21/1/14 at 11:08 AM |
|
|
Hi mate,
Sorry been a bit slow on this, i'll get pics and measurements for you tonight.
Cheers,
andy
|
|
|
pekwah1
|
| posted on 21/1/14 at 07:30 PM |
|
|
Hi,
Some photos:
As you can probably see, there's a fair bit of surface rust, I'll try and clean this up a bit!
Measurements: about a foot from flange to inside bend, about a foot down to the bed before the backbox.
Inlet ports - 33mm
End - 50mm (outside measurement)
Looking for £50
|
|
|
Brian R
|
| posted on 22/1/14 at 10:12 AM |
|
|
Excellent thank you Andy. I'll have a measure up tonight.
|
|
|
