locoboy
|
| posted on 25/9/09 at 06:56 PM |
|
|
Milling work required
Guys,
I have used David AKA Flak Monkey to do some work in the past and it was first class.
I dont *think* he has milling faclilities and i am looking at the possibilities of getting 'V8' milled to the depth of about 2mm in a bit
of 4mm thick ally plate.
I would need the edges of the lettering chamfered so thay are not sharp enough to cut fingers etc.
Plate will be approx 150mmx150mm and the V8 approx 100mmx80mm
In addition to this i may want an oval milled into the same plate above the V8 approx 70mm x 35mm.
If David can not offer this service is there anyone on here who can?
ATB
Locoboy
|
|
|
|
|
thefreak
|
| posted on 25/9/09 at 07:02 PM |
|
|
Can ask my engineer on Monday if you want? can you knock up a sketch of it?
|
|
|
Ben_Copeland
|
| posted on 25/9/09 at 07:02 PM |
|
|
Try searching for 3GE on the forums. They do lazer cutting ec. Worth a call.
Although hope your not in a rush cos i've been waiting ages for my stuff.
Ben
Locost Map on Google Maps
Z20LET Astra Turbo, into a Haynes
Roadster
Enter Your Details Here
http://www.facebook.com/EquinoxProducts for all your bodywork needs!
|
|
|
flak monkey
|
| posted on 25/9/09 at 07:54 PM |
|
|
No, sorry cant help with milling at the moment 
You will need to find someone with a CNC mill to do what you need.
Might be worth a look in your local yellow pages for a local engineering/fabrication place. They will likely be able to help out.
Cheers,
David
Sera
http://www.motosera.com
|
|
|
thefreak
|
| posted on 25/9/09 at 07:57 PM |
|
|
quote:
Originally posted by flak monkey
No, sorry cant help with milling at the moment
You will need to find someone with a CNC mill to do what you need.
Might be worth a look in your local yellow pages for a local engineering/fabrication place. They will likely be able to help out.
Cheers,
David
Thats what my engineer does  usually makes me brackets up for big brake kits along with any number of different parts in ally
|
|
|
rf900rush
|
| posted on 25/9/09 at 09:36 PM |
|
|
Hi
Does it need to be set in or raised "V8"
Image deleted by owner
 
If you realy get stuck, I may be able to give it a go.
Have a DIY CNC mill/drill at home.
Martin
|
|
|
BenB
|
| posted on 26/9/09 at 10:46 AM |
|
|
I wouldn't publisize that too loudly otherwise you might get swamped with favours.
Talking of which....... 
|
|
|
locoboy
|
| posted on 27/9/09 at 10:09 AM |
|
|
Rf900rush you have u2u!
Thanks guys
ATB
Locoboy
|
|
|
