hobbsy
|
| posted on 2/5/13 at 08:33 PM |
|
|
WTD: R1 (5PW) oil cooler bolt
I've just about managed to pick up the other bits I needed however this is still outstanding.
So this is the big bolt that passes through the centre of the oil/water heat exchanger. It is specific to the 5PW I think as the earlier 5JJ and
definitely 4XV are different
|
|
|
|
|
Barkalarr
|
| posted on 2/5/13 at 08:51 PM |
|
|
Let me know if you can't get one - I've got a mate who's got a bike shop so I'm sure we can get one.
|
|
|
hobbsy
|
| posted on 2/5/13 at 08:56 PM |
|
|
Barkalar,
I assume this would be a new part rather than used?
New prices on certain things like this are just plain daft.
I did have someone on here with one but we didn't really get the point of doing a deal (think he works away a lot)
|
|
|
Barkalarr
|
| posted on 2/5/13 at 09:04 PM |
|
|
Yes it will be a new part.
Ill have a chat with him in the morning and ill see how much it is.
I've got a list of about 30 breakers if you fancy a ring round?
I rang loads when I was looking for some 5PW clocks and added them to a spreadsheet so I didn't repeat myself (Geek Alert!!) - are these any
good?
|
|
|
hobbsy
|
| posted on 2/5/13 at 09:10 PM |
|
|
I will u2u with my email address for the spreadsheet. Did you have email addresses for any of them as I'm I overseas (car is in the UK though)
|
|
|
Barkalarr
|
| posted on 2/5/13 at 10:02 PM |
|
|
Sent you the spreadsheet.
No, sorry, just phone numbers - some of them have a website but they're not up to date - phone is the best way to contact
|
|
|
johnny chimpo
|
| posted on 2/5/13 at 10:12 PM |
|
|
I've got a spare oil cooler bolt you could have. Just replaced it this afternoon with a new one that I had drilled and tapped for a oil pressure
gauge fitting.
It's a little bit rusty but not as bad as I thought it was before I took it off.
I can get a pic of it for u tomorrow if your interested?
|
|
|
hobbsy
|
| posted on 2/5/13 at 10:13 PM |
|
|
Yes very much so, will u2u my email now.
Thanks
|
|
|
johnny chimpo
|
| posted on 2/5/13 at 10:15 PM |
|
|
Barkalarr, how much did you pay for r1 clocks? I might be looking for a set shortly so would be good to know a guide price.
|
|
|
Barkalarr
|
| posted on 2/5/13 at 10:28 PM |
|
|
johnny chimpo - I reckon you're looking at about £150. If you look on the bay, they're anything up to £250 !!
I managed to get mine for £120 from a scrappy in North London
You might be in luck though.... send a u2u to welderman
He's got a set which I tested for him at the end of last year - he wanted them tested before he sold them - he might still have them.
|
|
|
