mookaloid
|
| posted on 2/8/09 at 07:38 PM |
|
|
aaarrrggghh why does stuff vanish
Started assembly today and all going well until I went to the place where I stored all the bits for my rear calipers and one of the stupid little
stainless plate thing that clips into the hole in the caliper has just evaporated in to the air  
So I thought no problem I'll just order one form Brakeparts.co.uk but they don't sell them
So please help fellow locosters, please can someone tell me where I can buy one? or better still does anyone have one they would be able to swap for a
couple of beer tokens?
Cheers
Mark
"That thing you're thinking - it wont be that."
|
|
|
|
|
RichardK
|
| posted on 2/8/09 at 07:48 PM |
|
|
It'll probably be next to the pen and tape measure
Sorry can't help with your plate except for an offer to help to make one if possible?
Cheers
R
Gallery updated 11/01/2011
|
|
|
mookaloid
|
| posted on 2/8/09 at 07:58 PM |
|
|
quote: Originally posted by RichardK
It'll probably be next to the pen and tape measure
Sorry can't help with your plate except for an offer to help to make one if possible?
Cheers
R
Both pens and all 3 tape measures are in the top of my tool box and it's not with them
If we can find some some very thin stainless sheet then we could certainly make one - nice idea
Any one got any very thin stainless steel I'm guessing its about 1/4 mm thick and 3"square? I'll measure it later for actual
thickness.
"That thing you're thinking - it wont be that."
|
|
|
jacko
|
| posted on 2/8/09 at 08:33 PM |
|
|
One in the post
send your addressby u2u
Graham
|
|
|
mookaloid
|
| posted on 2/8/09 at 08:40 PM |
|
|
quote: Originally posted by jacko
One in the post
send your addressby u2u
Graham
Top bloke Graham
Thank you very much
Cheers
Mark
"That thing you're thinking - it wont be that."
|
|
|
jacko
|
| posted on 2/8/09 at 08:50 PM |
|
|
No problem
Graham
|
|
|
DarrenW
|
| posted on 2/8/09 at 10:57 PM |
|
|
Ive just checked my pockets etc and cant find one! Did i go home too early?
Looks like top lad jacko wins the day.
|
|
|
mcerd1
|
| posted on 3/8/09 at 07:17 AM |
|
|
just for future reference....
biggred seem to have most of bits that no one else sells:
http://www.biggred.co.uk/
-
|
|
|