flak monkey
|
| posted on 13/9/09 at 04:39 PM |
|
|
Spare crank puley
Looking for a spare crank pulley (or one to borrow for a week to measure up) for a duratec.
1.8, 2.0 or 2.3 they are all the same.
Just need to take some measurements so I can make myself a smaller pulley....
Cheers,
David
Sera
http://www.motosera.com
|
|
|
|
|
goaty
|
| posted on 13/9/09 at 05:05 PM |
|
|
if no one has one knocking about off engine i can go to my workshop one eve and unbolt mine for you to borrow if you wish 
juts get in touch if you need me to
cheers
|
|
|
austin man
|
| posted on 13/9/09 at 08:25 PM |
|
|
Curious why are you making a smaller one ??
Life is like a bowl of fruit, funny how all the weird looking ones are left alone
|
|
|
rusty nuts
|
| posted on 14/9/09 at 07:29 PM |
|
|
quote:
Originally posted by goaty
if no one has one knocking about off engine i can go to my workshop one eve and unbolt mine for you to borrow if you wish
juts get in touch if you need me to
cheers
Could be teaching you to suck eggs but
if you do that make sure you time the cams and crank before undoing the crank pulley bolt!
|
|
|
flak monkey
|
| posted on 14/9/09 at 07:54 PM |
|
|
quote:
Originally posted by austin man
Curious why are you making a smaller one ??
As the stock one is 132mm diameter and rotrex dont make a pulley big enough (115mm) to give me the boost i need.
A 110mm crank pulley will give me a good starting point with a 95mm pulley. Giving me plenty of scope to go up and down a long way on pulley sizes
should I choose.
I should have one on the way. If that falls through I will let you know goaty 
David
[Edited on 14/9/09 by flak monkey]
Sera
http://www.motosera.com
|
|
|
goaty
|
| posted on 14/9/09 at 08:02 PM |
|
|
okie doke, will unbolt it 2mo whilst i down there just in case.
|
|
|
flak monkey
|
| posted on 14/9/09 at 08:05 PM |
|
|
quote:
Originally posted by goaty
okie doke, will unbolt it 2mo whilst i down there just in case.
Like rusty nuts says, be careful
Sera
http://www.motosera.com
|
|
|
goaty
|
| posted on 14/9/09 at 08:16 PM |
|
|
no need to worry, whole engine will be stripped for rebuild etc. when the fun begins
|
|
|
goaty
|
| posted on 16/9/09 at 12:17 PM |
|
|
did you get sorted ok or did you wana borrow my one??
got it off ready for you in case now.
|
|
|
flak monkey
|
| posted on 16/9/09 at 04:34 PM |
|
|
Sorted thanks
Sera
http://www.motosera.com
|
|
|
goaty
|
| posted on 16/9/09 at 06:33 PM |
|
|
no worries
|
|
|
.jpg)
.jpg)
