NS Dev
|
| posted on 18/11/09 at 09:19 AM |
|
|
guillotine wanted, sheetmetal, min. 1m width cut
I'm on the lookout for a sheet metal guillotine, pref 3 phase power but a big treadle one would do. Must be min. of 1m wide cut and min of 2mm
cut thickness. Something like an old edwards or morgan 3 phase undercrank would be great!
cheers
Nat
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
|
|
|
MkII
|
| posted on 18/11/09 at 06:46 PM |
|
|
one on ebay item no.180433588069 old cost iron thing if its in good condition it'll last you forever. m.
|
|
|
