prelude1980
|
| posted on 15/12/09 at 07:33 PM |
|
|
m8 x 55 exhaust studs
as above i'm looking for 8 - m8 x 55 exhaust studs - seen burton ones but they seem a bit pricey
Speed has never killed anyone. Suddenly becoming stationary... that's what
gets you.
https://www.topcashback.co.uk/ref/dodd1980
|
|
|
|
|
RAYLEE29
|
| posted on 15/12/09 at 08:15 PM |
|
|
buy some stainless setscrews cut heads off voila studs or studding cut to length ad filed up
Ray
ps you may find plain studding screws into the head further than a shanked stud
|
|
|
prelude1980
|
| posted on 15/12/09 at 08:20 PM |
|
|
i didn't think of using standard studding, i have a couple lengths of that at work too bargain,
Thanks
Speed has never killed anyone. Suddenly becoming stationary... that's what
gets you.
https://www.topcashback.co.uk/ref/dodd1980
|
|
|
blakep82
|
| posted on 16/12/09 at 12:23 AM |
|
|
i was just going to cap head screws
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
