steve m
|
| posted on 24/2/13 at 01:15 PM |
|
|
Wanted, someone to modify a xflow sump
As it says above, any one on here know of, or can modify a x/flow sump, ?
I need about 2" chopped, but more added to the front, so as i do not lose any oil capacity
I have two candidate sumps and oil pick ups that can be sent ?
|
|
|
|
|
Westy1994
|
| posted on 24/2/13 at 03:38 PM |
|
|
If you get no joy closer to home I can pass over the number of the chap that did mine last year, he used to do the sumps for the rally boys back in
the day so knows what he is doing. Rather than adding depth in other areas he suggested using wings was better, sump now sits level with the bottom of
the bellhousing . Its the first time in 5 years that I haven't either wrecked a sump completely or at best put some bad dents in it. Same
capacity as well.
 Uploaded with
ImageShack.us" target="_blank">sump
|
|
|
CNHSS1
|
| posted on 24/2/13 at 07:58 PM |
|
|
I think Redturner on Uphill racers forum does xflow sump mods
"Racing is life, everything else, before or after, is just waiting"---Steve McQueen
|
|
|
