MsD
|
| posted on 7/8/13 at 09:03 PM |
|
|
WTD- 2.0 pinto head.
Evening all,
A friend of mine has just asked if I have a spare pinto head- I don't, but I told him I know a place that will!
So I'm after a 2.0 pinto head in good working order please.
Mark.
|
|
|
|
|
SteveWalker
|
| posted on 7/8/13 at 10:05 PM |
|
|
I have one (non-injection) removed a few years ago when I replaced it with an injection head. IIRC I pinched one of the rocker arm location springs
(not the main rocker springs), 'cos one on the new head was weak. Otherwise it should be okay. I'm around a mile from the Trafford Centre.
|
|
|
FuryRebuild
|
| posted on 7/8/13 at 10:11 PM |
|
|
I have a Dave Walker head, still attached to a pinto. It's also running a Tarmac rally cam and delivers serious horsepower. I have the matches
set of dellortos set up by by Bogg brothers if your friend is serious.
When all you have is a hammer, everything around you is a nail.
www.furyrebuild.co.uk
|
|
|
