Wishbone brackets and tube

Not logged in [Login - Register]

LocostBuilders » Forum » Wanted » Wishbone brackets and tube

Power Tools at MachineMart.co.uk

Printable Version | Subscribe | Add to Favourites

matty h

Posting Freak

Posts 1000
Registered 28/11/09
Location North Lincolnshire
Member Is Offline

Photo Archive Go!

Building: GTM Libra 1.8vvc + Westfield SEIW 1.8vvc

posted on 20/10/13 at 08:28 AM

Wishbone brackets and tube

I am looking to buy some wishbone mounting brackets and wishbone bush tubes can anyone tell me who sells these bits.
Thanks Matty

Slimy38

Contributor

Posts 4511
Registered 15/2/12
Location Wolverhampton
Member Is Offline

Photo Archive Go!

Building: Austin Healey rep

posted on 20/10/13 at 09:01 AM

I got my brackets from Dave at Rogue Engineering;

http://www.ebay.co.uk/sch/daveo1121/m.html?_nkw=&_armrs=1&_from=&_ipg=&_trksid=p3686

Very helpful guy, and sells different sized brackets. I did consider trying to make them myself, but for the cost I figured it wasn't worth my time.

And a fellow LCBer pointed out this for bush tubes;

15MM OD X 12MM ID 316 STAINLESS STEEL TUBE X 500MM

Myke 2463

Contributor

Posts 854
Registered 26/2/05
Location Sutton Bridge, Linc's
Member Is Offline

Building: Built Zetec powered LOCOST

posted on 20/10/13 at 10:09 AM

NTDWM.

Ebay shop http://stores.ebay.co.uk/talonproducts

Website http://www.talonmotorfabrication.co.uk/

Direct email talonmotorsport@hotmail.co.uk

Mobile Text only during office hours 07940708360

Be Lucky Mike.

LocostBuilders » Forum » Wanted » Wishbone brackets and tube

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.