Danozeman
|
| posted on 31/1/06 at 09:26 PM |
|
|
Narrow seats wanted CHEAP.
Has anyone got any seats going cheap? They need to fit in my locost. I got a pair and narrowed one slightly but i aint gonna fit in. and im a
skinny git.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
|
|
INDY BIRD
|
| posted on 31/1/06 at 09:39 PM |
|
|
I have a pair of corbeau seats black grey cloth with red/burgandy piping.
They came out of my old westfield so are norrow if you want measurements i can get tommorow.
in good condition but no seat runners.
picture attached.
£50 the pair a bargain in my books.
u2u if interested.
 
Rescued attachment IMGP0788.jpg
|
|
|
Danozeman
|
| posted on 31/1/06 at 10:15 PM |
|
|
u2u sent mate.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
Confused but excited.
|
| posted on 1/2/06 at 07:40 PM |
|
|
They all turn into a costly build!
If £50 is still too heavy, try a pair of 16" wide minibus seats. I got a mint pair for £25 complete with headrests.
A pair of Corbeau for £50 though! I'd stetch to them if I were you. Got to be a major bargain.
Tell them about the bent treacle edges!
|
|
|
Danozeman
|
| posted on 1/2/06 at 07:41 PM |
|
|
I think i am going to get them.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
owelly
|
| posted on 2/2/06 at 10:02 PM |
|
|
Sorry to hi-jack but I was just in the process of posting exactly the same thing!
I need a pair of very narrow seats. I have some narrow corbeaus but they are still too wide at the bottom. The car they are to go in has no doors but
fairly deep sills and a similar depth transmission tunnel so I need seats with narrow bases and lower lumbar support (or no lower lumbar support) and
perhaps slightly wider a bit higher, if you know what I mean??
Any suggestions? I have made some seat frames but I'd need to get them sprung/cushioned/covered.
Oh, and I'm after cheap!
http://www.ppcmag.co.uk
|
|
|
David Jenkins
|
| posted on 3/2/06 at 08:14 AM |
|
|
You could consider a pair of Baby Cub seats from Midland Wheels - don't know the current price, but it'll be around £100 for the pair.
Not the most beautiful things, but they don't look too bad and they're surprisingly comfortable.
David
|
|
|
owelly
|
| posted on 3/2/06 at 01:05 PM |
|
|
I'll have a measure if I can escape to the garage tonight!
http://www.ppcmag.co.uk
|
|
|
k33ts
|
| posted on 5/2/06 at 07:21 PM |
|
|
ive got a pair of intatrim voyagers black with yellow piping/
£150 the pair
if anyone is still lookjng for some
|
|
|
k33ts
|
| posted on 5/2/06 at 07:22 PM |
|
|
here.jpg)
|
|
|
Danozeman
|
| posted on 5/2/06 at 08:19 PM |
|
|
Theyr very nice seats the. what have you changed too?
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
k33ts
|
| posted on 5/2/06 at 11:15 PM |
|
|
cobras i think ive changed the colour of the car to kawasaki green so the yellow wont go anymore
ive enquired about getting them re-piped green and itll be cheaper to get new seats
|
|
|
