Board logo

NTDWM - Project for someone on here?
carpmart - 13/1/09 at 12:32 PM

As per the subject - might be of interest to someone on here?

http://cgi.ebay.co.uk/race-car-chassis-bodywk-parts-Nemesis-RE-97-98-Project_W0QQitemZ170294055366QQihZ007QQcategoryZ9883QQtcZphotoQQcmdZViewItemQQ_tr ksidZp1742.m153.l1262

Mr Whippy - 13/1/09 at 12:44 PM

chassis I'd ditch cos it looks rubbish but that body is nicely styled

[Edited on 13/1/09 by Mr Whippy]

eznfrank - 13/1/09 at 01:14 PM

Isn't that seller GBS (Robin Hood)?

andylancaster3000 - 13/1/09 at 01:33 PM

quote:
Originally posted by Mr Whippy
chassis I'd ditch cos it looks rubbish but that body is nicely styled

[Edited on 13/1/09 by Mr Whippy]


I wouldn't have said it'd that bad, in fact it looks pretty tidy and well designed. But you have to remember that the engine is a stressed member in it's current format.

Worth it just for the tub and the bodywork though. You could probably make a rather tidy RGB car with a bit of cutting about, or put it back into nat' supersports or sports 2000 if funds allowed. It's a shame it's missing things like the uprights though...

scootz - 13/1/09 at 03:05 PM

Wot he said... engine and box take the strain at the back.

andylancaster3000 - 13/1/09 at 05:01 PM

I think in fact that most of the running gear and suspension etc is taken from a F3 car. Ned on this forum would be able to tell you more as he knows and helps out someone who runs (or did run) a later one I think. Rather serious machines!