Board logo

ALLOY WHEELS EBAY
wacomuk - 26/7/09 at 07:09 PM

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=330347619255

handyandy - 26/7/09 at 07:14 PM

they look smart,

sorry, really dumb question....... would they fit the sierra hub? i see the measurements given but to be honest i don,t know enough about wheel fitment.

thanks
andy

omega0684 - 26/7/09 at 07:18 PM

how much would it cost to have that bent alloy put right? looks FUBAR'D to me

handyandy - 26/7/09 at 07:25 PM

quote:
Originally posted by omega0684
how much would it cost to have that bent alloy put right? looks FUBAR'D to me


sorry to ask Omega0684 but would they fit sierra hubs?
please excuse my lack of knowledge

thanks
andy

Peteff - 26/7/09 at 07:53 PM

They are dual PCD so they should fit anything with one of the sets of holes. The alloy is bent not fractured so it should be repairable. I've seen bike rear rims with similar damage straightened and no problems.

Guinness - 26/7/09 at 07:54 PM

quote:
Originally posted by handyandy
quote:
Originally posted by omega0684
how much would it cost to have that bent alloy put right? looks FUBAR'D to me


sorry to ask Omega0684 but would they fit sierra hubs?
please excuse my lack of knowledge

thanks
andy


Andy

108 will fit a four stud Ford.

You'll need some more info on the offset before you decide if they are right for you though.

Mike

handyandy - 26/7/09 at 07:59 PM

quote:
Originally posted by Guinness
quote:
Originally posted by handyandy
quote:
Originally posted by omega0684
how much would it cost to have that bent alloy put right? looks FUBAR'D to me


sorry to ask Omega0684 but would they fit sierra hubs?
please excuse my lack of knowledge

thanks
andy


Andy

108 will fit a four stud Ford.

You'll need some more info on the offset before you decide if they are right for you though.

Mike


ok thanks Mike,
i,ll make contact with seller or thru "wacomuk" who posted the thread.

i too have seen bike alloy wheels repaired ( i,ve dented a few in my racing past ).

what offset would they need to be ?
again sorry for lack of knowledge

cheers
andy

Gazeddy - 26/7/09 at 09:41 PM

Personally wouldn't trust a repaired wheel especially a dezent wheel have seen them bend at very little and have seen several sets become porous rather quickly

wacomuk - 26/7/09 at 09:48 PM

The off set is ET40

Iv had wheels fixed before with out problems.
iv seen wheels with chunks missing fixed with no problems
The wheel has been looked at by Clip engineering and they say it can be fixed

[Edited on 26/7/09 by wacomuk]

ashg - 26/7/09 at 10:25 PM

andy why do you want 17inch wheels on the kit car they are too big for your triton wheel arches and will make the thing look like its on stilts

handyandy - 26/7/09 at 10:50 PM

quote:
Originally posted by ashg
andy why do you want 17inch wheels on the kit car they are too big for your triton wheel arches and will make the thing look like its on stilts


ah, point taken Ash, thanks.

andy

ps
am just about to u2u you.