Ikea: name FIXA

I used this type of punch on my build for the exhaust tube holes. This ones too small for exhaust tubes but might be useful for something else (and you get a free tube cutter). I think the metal punches are normally about 20 quid each.... So £10 for the two bits is not bad....




They leave a lovely smooth edge without any need for deburring...

http://www.ikea.com/gb/en/catalog/products/28512100

Important Ø35mm

JC

[Edited on 17/8/09 by SeaBass]

I know I was feeling lazy and I was supposed to be looking at kitchens online with the missus rather than LBing