Board logo

Rotary engine anyone ?
Wadders - 19/5/10 at 09:25 PM

Fancy rotary power? If so i found just the thing
for you

http://www.racecarsdirect.com/listing/31148/Mazda_20B_Rotary_Race_Engine_for_sale.html


bi22le - 19/5/10 at 09:55 PM

Ah wadders I have missed your Avitar . . I mean posts!!

How is she anyway? Bouncing along as usual!?


Hellfire - 19/5/10 at 10:02 PM

Blo*dy 'ell Alan, wondered where you'd gone!

Good to see you around still!

Steve


Vindi_andy - 20/5/10 at 09:32 AM

30 Hours between referesh!!!!


Antnicuk - 20/5/10 at 01:40 PM

Nice but expensive with that power, running n/a it should go on for a lot longer than 30 hours. That torque figure is very low also, my 2 rotor has over 300 ftlbs. We have an rx7 with the 3 rotor engine turbo charged, at 0,9 bar boost it makes 500 rwhp and 500 torques!

That's peripheral ported which would be no good on a road car but lovelly in a lightweight track if the engine has been built rev which from the spec sounds like it has.

And yes, I agree, the OP's avatar is yummy, is she yours?