BenB
|
| posted on 17/8/09 at 05:32 PM |
|
|
Cheap sheet metal punch
Ikea: name FIXA
I used this type of punch on my build for the exhaust tube holes. This ones too small for exhaust tubes but might be useful for something else (and
you get a free tube cutter). I think the metal punches are normally about 20 quid each.... So £10 for the two bits is not bad....
They leave a lovely smooth edge without any need for deburring...
|
|
|
|
|
SeaBass
|
| posted on 17/8/09 at 06:09 PM |
|
|
http://www.ikea.com/gb/en/catalog/products/28512100
Important Ø35mm
JC
[Edited on 17/8/09 by SeaBass]
|
|
|
BenB
|
| posted on 17/8/09 at 09:23 PM |
|
|
I know I was feeling lazy and I was supposed to be looking at kitchens online with the missus rather than LBing 
|
|
|
