Jason Fletcher
|
| posted on 4/8/09 at 07:09 PM |
|
|
brembo master cyl. Ideal for BEC clutch
It's a 11mm bore so perfect for a BEC clutch. It looks new apart from the banjo bold and the plunger which are used.
L
ike this one on Ebay But mine is better condition.
£18.00 inc UK post
Payment via Paypal for ease please (I'm a poet and didn't know it...)
jason
[Edited on 4/8/09 by Jason Fletcher]
|
|
|
|
|
matt_gsxr
|
| posted on 4/8/09 at 09:01 PM |
|
|
You have to be a little careful when the diameter gets as small as this, as the stroke is always short, so the total volume can be tiny.
What is the stroke length on this one?
Matt
|
|
|
Jason Fletcher
|
| posted on 4/8/09 at 09:29 PM |
|
|
Matt
Its a 1/2 inch stroke. I had a 14mm AP one on my Busa clutch which needed less than 1/2 in travel and was still too much. This is why I got this one
but never got round to fitting it. I'd be suprised if it was not perfect for the job.
jason
|
|
|
