saigonij
|
| posted on 6/3/08 at 04:10 PM |
|
|
Rally Design - RMD Gauges
saw a news article in Fast Ford, so i thought i would check out Rally Designs RMD gauges...
they look pretty good, and most importantly, alot cheaper than most gauges on the market...
for an 80mm speedo, 80mm tacho, 52mm fuel, 52mm oil press and 52mm water temp + sensors, i worked it out at just over £300, then postage on top!
not bad considuring ETb, the next cheapest are £342...
|
|
|
|
|
nick205
|
| posted on 6/3/08 at 04:16 PM |
|
|
No direct comparison as I haven't used Rally Design or seen their guages, but ETB are worth every penny IMHO. The quality, service and support
were absolutely top dollar.
|
|
|
Myke 2463
|
| posted on 6/3/08 at 06:07 PM |
|
|
ETB Gauges
Check out this months kitcar.
etb mechanical speedo, tacho, fuel,water and oil temp with all the bits inc vat & del £ 199. and a choice of 2 different tyres.
|
|
|
saigonij
|
| posted on 6/3/08 at 06:16 PM |
|
|
that deal has been around for a while - trouble is i want an electric speedo, and after talking to them, it takes the price up to 320 ish.
still ALOT of money!
|
|
|
blakep82
|
| posted on 6/3/08 at 06:22 PM |
|
|
£80 for an 80mm electronic speedo! thats like £1 for every mm!
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
robertst
|
| posted on 6/3/08 at 07:00 PM |
|
|
quote:
Originally posted by saigonij
saw a news article in Fast Ford, so i thought i would check out Rally Designs RMD gauges...
they look pretty good, and most importantly, alot cheaper than most gauges on the market...
for an 80mm speedo, 80mm tacho, 52mm fuel, 52mm oil press and 52mm water temp + sensors, i worked it out at just over £300, then postage on top!
not bad considuring ETb, the next cheapest are £342...
yeah, but are they illuminated?
Tom
|
|
|
saigonij
|
| posted on 2/4/08 at 12:29 PM |
|
|
i gave them a ring today, and no they are not illuminated - which is a bit rubbish really.
any ideas on how to make them illuminated?
|
|
|
