Printable Version | Subscribe | Add to Favourites
New Topic New Reply
Author: Subject: Zetec flywheel identification
pekwah1

posted on 6/4/18 at 08:01 PM Reply With Quote
Zetec flywheel identification

Hi guys,

I have a 2.0 blacktop zetec and thought Iíd buy a 1.8 flywheel to save some weight but it doesnít fit, it fouls on a few bolts on the engine as it is flatter on the reverse side than the original 2.0 fly.

Is anyone able to see what flywheel I have managed to buy here?






The 1.8 fly is the one with the three holes next to each other.

Thanks In advance
Andy

View User's Profile E-Mail User View All Posts By User U2U Member
coozer

posted on 7/4/18 at 12:14 PM Reply With Quote
Obviously not a zetec 1.8, all the zetec flywheels are interchangeable because all zetec cranks are the same. might be off a cvh engine...

this is a 1.8 zetec flywheel...







[Edited on 7/4/18 by coozer]





1972 V8 Jago

1980 Z750

View User's Profile Visit User's Homepage View All Posts By User U2U Member
tims31

posted on 7/4/18 at 02:14 PM Reply With Quote
Yep,

Doesn't look like the 1.8 Zetec as coozer says.

Mine (1.8 Mk1 Focus) for a blacktop looks the same as coozers

here

Is yours the same diameter as the original?





Build: http://www.martinsfurybuild.co.uk/

View User's Profile Visit User's Homepage View All Posts By User U2U Member
big_wasa

posted on 7/4/18 at 03:18 PM Reply With Quote
Itís definitely not a 1.8 Zetec. I donít think itís efi cvh and if it was it would fit by drilling the holes out from 10mm to 11mm.

It looks a little Pinto or ohv to me.

Either way itís bin fodder.

View User's Profile View All Posts By User U2U Member
pekwah1

posted on 7/4/18 at 05:35 PM Reply With Quote
Thanks for the replies all, I think Iíve worked out what it is, looks like a 1.4 flywheel, think itís my mistake so canít be too annoyed apart from at myself!
If anyone happens to have a 1.8 flywheel handy let me know otherwise I guess Iím off shopping again!

Thanks
Andy

View User's Profile E-Mail User View All Posts By User U2U Member
SJ

posted on 7/4/18 at 08:04 PM Reply With Quote
I think I have one tucked away somewhere. I'll have a look tomorrow.
View User's Profile View All Posts By User U2U Member

New Topic New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.