Hi all,

has anyone got this scoop from carbon Mods?

http://www.carbonmods.co.uk/Products/Carbon-Fibre-Kit-Car-Bonnet-Scoop__CMBSCLG01.aspx

I want to fit one, but wanted to double chekc the dims.

also any pics of it fitted?

Namely the width at the front and the width at the rear aswell as the height.

anyone able to help?

Many thanks

i was looking at buying one a while back, ended up making a paper template to the dimensions on the website, personally i would prefer it to be a little narrower, as the width ran quite close to the edge of my bonnet

I can get these made in pre-preg glass or carbon.....

http://www.locostbuilders.co.uk/viewthread.php?tid=102605&page=&contribmessage=none

approx size is 430mm wide by 100mm high by 900mm long

Ive got one fitted to mine.. il get some pics uploaded of it a bit later

quote:

---

Originally posted by chris mason
looks identical too the mk/kia bulge, so your options for dimesions could be answered by an owner of one of those too

Chris

---

anyone get any further on this??
i having trouble getting clearance on my bonnet now, need the my scoop slightly bigger but the Carbon mods one looks far to wide by the measurements they state.
The one linked above is too large for my likings too.
The shape is good if can be a bit smaller.....
cheers

I'm just putting the finishing touches to a bonnet bulge that is 14" wide 2" high and 36" long. Mould should be ready in a week or so.Will post a picture of first one pulled.

Cheers
Mark

Ive put some pics of mine with the Carbon mods vent fitted here:

http://locostbuilders.co.uk/viewthread.php?tid=103548